Type T Thermocouples
T Type Thermocouples provide one of most accurate and durable temperature measurement solutions from the extreme cold Cryogenics range of - 450°F ( -270°C) (helium gas turns to liquid) to 700°F (370°C) (melting point beyond most thermoplastics)
-
Type T can provide Good Accuracy and stability in the temperature range of -319°F to 400°F (–195°C to 200°C)
-
Standard accuracy is +/- 1.0C or +/- .75% whichever is greater.
- Reduced accuracy can occur with temperatures lower than -319°F (-195°C) with a deviation of ±3°C or more.
- SLE or Special Limits of Error accuracy ( +/- 0.5°C or 0.4%) can be achieved with a carefully matched pair of Copper (positive) and Constantan (negative) thermocouple alloys.
-
Standard accuracy is +/- 1.0C or +/- .75% whichever is greater.
- Color Codes -ANSI (American National Standard Institute) Blue positive, Red negative with solid Blue or Blue trace overall with wire and connectors.
- IEC ( International Electrotechnical Commission) Brown positive, White negative and Brown overall on wire and connectors
- The Filter Search tool on the Left or the Clickable product categories below will aid in your selection of the Type T thermocouple products
- Thermocouple Probes with a stainless steel or PFA protected metal sheath for immersion in liquids, gases, air and other industrial applications.
- Beaded Thermocouples designs with fine diameter PFA and Fiberglass insulated lead wire with high flexibility and very fast response time.
- Surface Thermocouples with stick on, and bolt-down versions for process equipment monitoring and control.
- Thermocouple Connectors include miniature, standard size, panel mounted, circuit board and other configurations available in thermoplastics, thermosets and ceramics.
- Thermocouple Wire with diameter and insulations from fine diameter 40 gage (.003") to rugged 20 Gage (.032") with Plastic Fluoropolymers to higher temperature Fiberglass.
- Industry applications - cryogenic to relatively lower temperature testing in laboratory and overall research or product development for medical, aerospace and electronics including vacuum environment testing.
- Type T thermocouples provide a good temperature range for food processing although recently this thermocouple is being displaced in the food and beverage industry with RTD temperature sensors.
-
Type T Thermocouple Probe 1/8" Diameter 6 Inches Long Stainless Steel Sheath Grounded Junction with Miniature Connector
$66.00
-
Type T Miniature Male Thermocouple Connector
$5.00
-
Beaded Wire Thermocouple Type T with 12 to 40 Inches of 36 Gage PFA Insulated Wire and Miniature Connector
$29.00
-
Type T Thermocouple Probe 1/16" Diameter Ungrounded 6 Inches Long with Transition to 40 Inches of FEP Lead Wire with Connector or Stripped Ends
from $73.00
-
Type T Surface Thermocouple with Surface Mount Adhesive Patch and 40 Inches of PFA Insulated Lead Wire
$27.00
-
Beaded Wire Thermocouple Type T with 2 to 40 inches of 36 Gage PFA Wire with Stripped Leads
$22.00
-
Type T Thermocouple Probe Tube and Wire Design 1" Long Probe with 80" of PFA Lead Wire with Miniature Connector or Stripped End Termination
from $44.00
-
Surface Thermocouple Type T with Surface Mount Adhesive Patch and 40 inches of 30 Gage PFA Insulated Wire with Miniature Connector
$35.00
-
Type T Miniature Female Thermocouple Connector
$5.00
-
Pipe Plug Thermocouple Probe - Type T Thermocouple Ungrounded Junction with 1/4" NPT Fitting and Stainless Braided Wire Leads with Connector or Stripped Leads
from $87.00
-
Micro Thermocouple - Type T 40 Gage Fine Wire Temperature Sensor Assembly with 40 Inches of PFA Insulated Leads with a Miniature Male Flat Pin Connector
$45.00
-
Thermocouple Beaded Wire Sensor - Type T 30 Gage PFA Insulated 40 inches long with Stripped Leads
$18.00
-
Type T Surface Thermocouple with Surface Mount Adhesive Patch and 80 inches of 30 Gage PFA Insulated Wire with Miniature Connector
$40.00
-
Type T Thermocouple 1/16" Diameter Probe 6 Inches Long with Transition to 80 Inches of FEP Lead Wire
$80.00
-
Surface Thermocouple Type T with Surface Mount Adhesive Patch and 80 inches of 30 Gage PFA Insulated Wire with Stripped Leads
$31.00
-
Type T Surface Thermocouple for Low Temperatures with Self Adhesive Patch and 10 ft of PFA Insulated Wire with Miniature Connector
$44.00
-
Type T Beaded Wire Thermocouple with Rugged 20 Gage PFA Insulated Wire Leads 40 Inches Long
$22.00
-
Type T PFA Insulated Thermocouple with 80 inches of Rugged 20 Gage Solid Wire Leads with Stripped Ends
$31.00
Special Offers and Product Education
