Type K Thermocouple - Items tagged as "Polyimide-glass-reinforced-tape"
A Type K Thermocouple is one of most utilized temperature sensor technologies across the globe due to its wide temperature range -326 to 2300°F (-200 to 1260°C), the ease of use and cost value. Type K thermocouples can be found in very diverse applications from harsh industrial and machinery environments to precise research and laboratory applications to general temperature measurement including everyday consumer use.
- Temperature Range of -326 to 2300°F (-200 to 1260°C)
- Below 32°F (0°C) requires a special matching of the positive Nickel Chrome KP and negative Nickel Aluminum KN thermocouple alloys is required to provide acceptable accuracy.
- Maximum continuous temperature is about 2,000°F (1,100°C) although can function at higher temperatures with special sheathing, high purity insulation and precise manufacturing methods
- Type K should not be used in reducing atmospheres unless protected by an appropriate protective sheath
- Sensor contructions range from exposed fast response small diameters to larger diameters with special protective sheaths and others designed for surface measurement.
- The Type K bare thermocouple elements can protected by compacted mineral insulation inside a bendable metal and rigid ceramic sheaths to very flexible fiberglass braid and PFA/FEP teflon insulated wire designs.
- The Filter Search tool on the Left or Click on the product categories below will aid in your product selection.
Type K Thermocouple Probes - with Stainless Steel, Inconel metal sheaths, and Ceramic Alumina Sheaths ranging in diameter from very fine .010" Inch (0.25mm) to rugged .250" (1/4" or 6.35mm). Probe terminations include, miniature and standard size connectors or wire leads
Type K Beaded Thermocouples - PFA, Fiberglass, and Ceramic insulated lead wire with high flexibility, diameters ranging fine 40 gage to rugged 20 gage, and temperature ranges from -326 to 2200°F; micro-beaded exposed weld provides very fast response times.
Type K Surface Thermocouples - stick on and bolt down versions available, with wire diameter ranging from .005" to .020", along with handheld probes; products are commonly utilized for new product development and reliability analysis
Type K Thermocouple Connectors - miniature, standard size, panel mounted, circuit board and other configurations available in thermoplastics, thermosets and ceramics
Type K Thermocouple Wire - diameter and insulations from fine diameter 40 gage (.003") to rugged 20 Gage (.032") with Plastic Fluoropolymers to higher temperature Fiberglass and or with Metal Overbraiding.
-
Type K Surface Thermocouple with Self-Adhesive Patch and 40 inches of 30 Gage PFA Insulated Wire with Stripped Leads
$29.00
-
Surface Thermocouple Type K with Surface Mount Adhesive Patch 10ft (120 inches) of 30 Gage PFA Insulated Wire with Miniature Connector
$44.00
-
Surface Thermocouple Type K with Surface Mount Adhesive Patch and 120 inches of 30 Gage PFA Insulated Wire with Stripped Leads
$32.00
-
Type K Surface Thermocouple with Surface Mount Adhesive Patch and 40 inches of 30 Gage PFA Insulated Wire with Miniature Connector
$35.00
-
Surface Thermocouple Type K with Surface Mount Adhesive Patch and 80 inches of 30 Gage PFA Insulated Wire with Miniature Connector
$37.00
-
Surface Thermocouple Type K with Surface Mount Adhesive Patch and 80 inches of 30 Gage PFA Insulated Wire with Stripped Leads
$27.00
-
Type K Cement On Thermocouple Non-Adhesive Surface Patch with 40 inches of Fiberglass Insulated Wire Leads
$44.00
-
5 Pack of Type K Surface Thermocouples with Self Adhesive Patch and 80 inches of Lead Wire with Miniature Connector
$174.00
-
Type K Surface Thermocouple 5 Pack with Self-Adhesive Patch 40 inches of 30 Gage PFA Insulated Wire with Stripped Leads
$145.00
-
Type K Surface Thermocouple with Adhesive Patch and Custom 12 ft Length of Rugged and Flexible 24 Gage PFA Insulated Wire with Stripped Leads
$37.00
-
Type K Surface Thermocouple 5 Pack with Self-Adhesive Patch and 15 to 30ft of 30 Gage PFA Insulated Wire with Stripped Leads
from $181.00
-
Type K Surface Thermocouple Self Adhesive Patch Design with 5 to 50ft or Other Custom Lead Wire Lengths and Miniature Connector
from $37.00
-
Type K Surface Thermocouple with 2 Inch Wide Adhesive Patch and Rugged 24 Gage FEP Insulated Wire 80 Inches Long with Miniature Connector
$37.00
-
5 Pack of Type K Thermocouple with Surface Adhesive Patch and 120 inches of Fiberglass Wire with Miniature Connector
from $290.00
-
Type K Surface Thermocouple 5 Pack with Self-Adhesive Patch 80 Inches (2 Meters) of 30 Gage PFA Insulated Wire with Stripped Leads
$131.00
-
Type K Surface Thermocouples 5 Pack - Self-Adhesive Patch Design with 10ft Long PFA Insulated Leads and Miniature Male Connector
$181.00
-
Type K Surface Thermocouple with NON Adhesive Patch and 40 Inch Long Rugged and Flexible 24 Gage Stranded FEP Insulated Wire with Stripped Leads
$37.00
-
5 Pack of Type K Thermocouple with Surface Adhesive Patch with Fiberglass Wire and Miniature Connector
from $253.00
Special Offers and Product Education
