Type K Thermocouple
A Type K Thermocouple is one of most utilized temperature sensor technologies across the globe due to its wide temperature range -328 to 2300°F (-200 to 1260°C), the ease of use and cost value.
-
Temperature Range of -328 to 2300°F (-200 to 1260°C)
- Standard Accuracy is (Standard Limits of Error) ± 2.2°C or ± 0.75% whichever is greater in the temperature range of 32 to 2300°F (0 to 1260°C)
- High Accuracy is (Special Limits of Error) ± 1.1°C or ± 0.4% whichever is greater in the temperature range of 32 to 2300°F (0 to 1260°C)
- Low Temperature Accuracy from 32 to -328°F (0 to -200°C) is typically Standard Limits of Error (±) 2.2°C or (±) 0.75% whichever is greater
- Sensor Contructions range from exposed fast response small .010" (.25 mm) diameters to .375" (9.5 mm) or larger diameters with protective sheaths for immersion processes and others special designs for surface or flow temperature measurement.
- The Type K bare thermocouple elements can protected by compacted mineral insulation inside a bendable metal and rigid ceramic sheaths to very flexible fiberglass and ceramic braid or PFA/FEP teflon insulated wire designs.
- Type K thermocouples can be found in very diverse applications from harsh industrial and machinery environments to precise research and laboratory applications to general temperature measurement including everyday consumer use.
- The Filter Search tool on the Left or Click on the product categories below will aid in your product selection.
Type K Thermocouple Probes - with Stainless Steel, Inconel metal sheaths, and Ceramic Alumina Sheaths ranging in diameter from very fine .010" Inch (0.25mm) to rugged .250" (1/4" or 6.35mm). Probe terminations include, miniature and standard size connectors or wire leads
Type K Beaded Thermocouples - PFA, Fiberglass, and Ceramic insulated lead wire with high flexibility, diameters ranging fine 40 gage to rugged 20 gage, and temperature ranges from -326 to 2200°F; micro-beaded exposed weld provides very fast response times.
Type K Surface Thermocouples - stick on and bolt down versions available, with wire diameter ranging from .005" to .020", along with handheld probes; products are commonly utilized for new product development and reliability analysis
Type K Thermocouple Connectors - miniature, standard size, panel mounted, circuit board and other configurations available in thermoplastics, thermosets and ceramics
Type K Thermocouple Wire - diameter and insulations from fine diameter 40 gage (.003") to rugged 20 Gage (.032") with Plastic Fluoropolymers to higher temperature Fiberglass and or with Metal Overbraiding.
-
5 Pack of Type K Thermocouples Fiberglass Braided 30 Gage Solid Wire 80 Inch Long Leads with Stripped Ends
$116.00
-
Type K Thermocouple 5 Pack Fiberglass Braided 30 Gage Solid Wire 40 Inch Long Leads with Stripped Ends
$94.00
-
Type K Thermocouple Probe – 12 Inch Long 1/8" Diameter Stainless Steel MI Cable Ungrounded with Transition to FEP Lead Wire and Miniature Connector
$87.00
-
Type K Thermocouple Probe - 12 Inch Long 1/4" Diameter Stainless Steel Sheath Ungrounded with a Transition to 360 Inches of Stainless-Steel Over Braided Fiberglass Insulated Lead Wire - Miniature Male Connector or Stripped Leads
from $217.00
-
Type K Fiberglass Braided Thermocouple with 80 Inches (2 Meters) of Fine Diameter 36 Gage Wire and Miniature Connector
$48.00
-
Type K Surface Thermocouple with 40 Gage Micro Diameter Wire and 40 Inch (3.3 ft 1 Meter) of PFA Insulated Wire with Miniature Connector
$51.00
-
Type K Thermocouple Probe 1/16" Diameter 24 Inches Long Stainless Steel Sheath Grounded with a Standard Size Male Round Pin Connector
$80.00
-
Type K Dual Thermocouple Probe 6 Inches Long 1/8" Diameter Stainless Steel Sheath Grounded with a Dual Miniature Connector
$130.00
-
Type K Thermocouple Probe 1/16" Diameter 9 Inch Long Inconel Sheath Grounded with Miniature Connector
$73.00
-
Type K Thermocouple Probe 1 to 6 Inches Long 1/8" Diameter Stainless Steel Sheath with 24 Gage Fiberglass Insulated Lead Wire
from $58.00
-
K Type Thermocouple Probe – 12-Inch Long 1/8" Diameter Stainless Steel Tube Ungrounded with a Transition to FEP Lead Wire with Stripped Ends
from $65.00
-
Type K Thermocouple Wire 20 Gage Solid with Stainless Steel Braid over Fiberglass Insulation
from $94.00
-
Type K Thermocouple Wire 20 Gage Solid with Fiberglass Braid Insulation
from $51.00
-
Right Angle Surface Thermocouple for Automated Processes and Machinery - 6 mm Diameter Sensor with Silicone Lead Wire
$1,298.00
-
Inconel Thermocouple Probe Type K 1/8" Diameter 24 Inches Long Ungrounded with Miniature Male Connector
$80.00
-
Type K Thermocouple with Surface Adhesive Patch and 6 Inches to 50ft of Fiberglass Braid Insulated Wire with Miniature Connector
from $51.00
-
Type K Hastelloy Sheathed Thermocouple Probe 2 Inch and LONGER 1/8" Diameter with Miniature Connector
from $94.00
-
Type K Insulated Thermocouple with Connector with 120 inches of Flexible 30 Gage PFA Insulated Wire and Miniature Male Connector
$44.00
Special Offers and Product Education
