Type K Thermocouple with Surface Adhesive Patch and 6 to 600 Inches (50ft) of Fiberglass Braid Insulated Wire with Miniature Connector

Type K Thermocouple with Surface Adhesive Patch and 6 to 600 Inches (50ft) of Fiberglass Wire with Miniature Male Flat Pin Connector.

• Temperature Operating range is -100 to 500F (-73 to 260°C)
  • Capabilities to 600°F (315°C) with thermal epoxy or ceramic cement.
• Surface Patch is 1" (25 mm) long x .750" (19 mm) Wide x .012" (0.3 mm) thick tape with a silicon based adhesive
  • Response Time can be less than 0.5 Seconds.
• Temperature Sensor design is made from highly accurate SLE thermocouple grade wire with a flattened weld encased in polyimide tape
• Wire Leads are 6 to 600 Inches (50ft) long
• Wire Construction is a proprietary 30 Gage solid parallel construction with 900°F (482°C) rated fiberglass insulation on the inner wires and outside jacket. diameter of nominal .037" x .050".
  • Fiberglass braided wire utilized in a wet or extreme humidty environment can potential cause significat temperature measurement error due to shorting of the circuit.
• Instrument Connection is a miniature male flat pin thermocouple connectors with a silcone rubber strain relief.
  • The plastic connector body has a temperature range of -40 to 400°F (-40 to 200°C) although it can accurately transfer the full range of Type K thermocouples.
• Applications and Industries include Semi-Conductor, Oil and Gas, Off-Road and Agriculture Equipment, Automotive, Aerospace, overall Product Development and Testing along with many other industries.
• EvoSensors Part Number: K1X-TAPE-REC-FW-1-FGXX-40-MPCX with 40 inches (1 meter or 3.3 ft) of lead wire

Consider the following Accessories to complete your Sensor System