5 Pack of Type K Thermocouple with Surface Adhesive Patch and 120 inches of Fiberglass Wire with Miniature Connector

5 Pack of Type K Thermocouple with Surface Adhesive Patch and 120 inches of Fiberglass Wire with Miniature Thermoplastic or High Temperature Thermoset Connector.

• Temperature Operating range is -100 to 500°F (-73 to 260°C)
  • Capabilities to 600°F (315°C) with thermal epoxy or ceramic cement.
• Surface Patch is 1" (25 mm) long x .500" (12.7 mm) Wide x .012" (0.3 mm) thick tape with a silicon based adhesive
  • Response Time can be less than .05 Seconds.
• Temperature Sensor design is made from highly accurate SLE thermocouple grade wire with a flattened weld encased in polyimide tape
• Wire Leads are 120 Inches (10ft or 3 meters) long
• Wire Construction is a proprietary 30 Gage solid parallel construction with 900°F (482°C) rated fiberglass insulation on the inner wires and outside jacket. diameter of nominal .037" x .050".
• Instrument Connection - miniature male flat pin thermocouple connectors.
  • Thermoplastic body with a -40 to 400°F (-40 to 200°C) rating or
  • Thermoset connector body with a higher temperature -40 to 660°F (-40 to 350°C) rating
  • Both connector designs can accurately transfer the full range of Type K thermocouples.
• EvoSensors Part Number: K5X-TAPE-REC-FW-1-FGXX-120-MPCX with a Thermoplastic connector body.
  • K5X-TAPE-REC-FW-1-FGXX-120-MHCX with a High Temperature Thermoset connector body.

Consider the following Accessories to complete your Sensor System