5 Pack of Type K Fast Response Surface Thermocouple with Surface Mount Adhesive Patch and 40 Inch (1 Meter) and LONGER Fiberglass Insulated Wire with Stripped Leads

5 Pack of Type K Fast Response Surface Thermocouple with Surface Mount Adhesive Patch and 40 Inch (1 Meter) and LONGER Fiberglass Insulated Wire with Stripped Leads

• 5 pieces of Type K Thermocouples  with a flattened welded junction of SLE Accuracy Wire encased in a Polyimide Tape Fiberglass Reinforced Patch with Silicone Adhesive and Lead Wires with stripped end 
• Temperature Operating range is -90 to 500 F (-70 to 260 C) with capabilities to 600°F (315°C) with high temperature epoxy or ceramic cement.. . 
• Response Time is 0.5 Seconds. 
• Surface Adhesive Patch measures 1" long x .750" Wide x .012" Thick
  • Patch can be reduced/cut in the field.
• Lead Wire transitions to 40 to 120 Inches (3.3 to 10ft or 1 to 3 meters) or LONGER Fiberglass braid insulated wire and stripped leads.
• Wire Construction is 30 Gage Solid construction with Fiberglass insulated wires and outside jacket rated to 900°F (482°C). The overall outside diameter is a nominal .037" x .050". 
• ANSI color code - Positive Nickel Chrome wire with Yellow insulation, Negative Nickel Aluminun wire with Red insulation and Brown overall jacket
• Click for Spec Sheet in PDF format
• EvoSensors Part Number: K5S-TAPE-REC-FW-1-FGXX-40-STWL with 40 inches (1 meter of lead wire) - Location: Single piece design D-6-1
  • K5S-TAPE-REC-FW-1-FGXX-80-STWL with 80 inches (2 meters of lead wire) 
  • K5S-TAPE-REC-FW-1-FGXX-120-STWL with 120 inches (3 meters 0r 10ft of lead wire) 

Consider the following Accessories to complete your Sensor System