Evolution Sensors and Controls, LLC - 6700 Forum Drive Suite 125 - Orlando, FL 32821 - Ph. 407-420-8080 - Fax: 407-420-8083 - email: info@evosensors.com
Type C Thermocouple Wire - Items tagged as "Miniature-ceramic-female"
Type CThermocouple Wire and Insulated Extension Wire
Bare Thermocouple Grade Wire -Tungsten-5% Rhenium vs Tungsten-26% Rhenium available from fine diameter 40 gage (.003") to 24 gage (.020) with matched pairs providing accuracy of ±4.4°C or ±1%
Insulated Extension Wire is compensating materials and notmade from the Type C Tungsten-Rhenium materials. The extension wire is designed to extend/transfer the thermocouple signal from the C Type Thermocouple probes.
Extension Wire Accuracy-the insulated wire is typically tested to in the range of 32°F to 392°F (0°C to 200°C). The wire can accurately transfer the full range of Type C thermocouples.
Insulationson the extension wire are typically FEP or PFA fluoropolymers (400 to 500°F or 200 to 260°C) andFiberglass Braid(900°F or 482°C)
Designs with wire insulation temperature rangesexceedingthe typical bare wire accuracy range of 32°F to 392°F (0°C to 200°C) should be made from specially matched bare wire pairs to ensure accuracy in these higher temperature ranges.
ANSI Color Codeof Type C extension wire typically has a white positive wire, red negative wire and white outside PFA or FEP fluoropolymer outside jacket, although this can be confused with IEC color code for 2 conductor RTD wire.
Evosensors has created this wire with an Orange colored jacket to eliminate the color code confusion.
Fiberglass Insulated Type C wire are white positive, red negative and white outside jacket with a red stripe.