Type K Thermocouple - Items tagged as "96-inches"
A Type K Thermocouple is one of most utilized temperature sensor technologies across the globe due to its wide temperature range -328 to 2300°F (-200 to 1260°C), the ease of use and cost value.
-
Temperature Range of -328 to 2300°F (-200 to 1260°C)
- Standard Accuracy is (Standard Limits of Error) ± 2.2°C or ± 0.75% whichever is greater in the temperature range of 32 to 2300°F (0 to 1260°C)
- High Accuracy is (Special Limits of Error) ± 1.1°C or ± 0.4% whichever is greater in the temperature range of 32 to 2300°F (0 to 1260°C)
- Low Temperature Accuracy from 32 to -328°F (0 to -200°C) is typically Standard Limits of Error (±) 2.2°C or (±) 0.75% whichever is greater
- Sensor Contructions range from exposed fast response small .010" (.25 mm) diameters to .375" (9.5 mm) or larger diameters with protective sheaths for immersion processes and others special designs for surface or flow temperature measurement.
- The Type K bare thermocouple elements can protected by compacted mineral insulation inside a bendable metal and rigid ceramic sheaths to very flexible fiberglass and ceramic braid or PFA/FEP teflon insulated wire designs.
- Type K thermocouples can be found in very diverse applications from harsh industrial and machinery environments to precise research and laboratory applications to general temperature measurement including everyday consumer use.
- The Filter Search tool on the Left or Click on the product categories below will aid in your product selection.
Type K Thermocouple Probes - with Stainless Steel, Inconel metal sheaths, and Ceramic Alumina Sheaths ranging in diameter from very fine .010" Inch (0.25mm) to rugged .250" (1/4" or 6.35mm). Probe terminations include, miniature and standard size connectors or wire leads
Type K Beaded Thermocouples - PFA, Fiberglass, and Ceramic insulated lead wire with high flexibility, diameters ranging fine 40 gage to rugged 20 gage, and temperature ranges from -326 to 2200°F; micro-beaded exposed weld provides very fast response times.
Type K Surface Thermocouples - stick on and bolt down versions available, with wire diameter ranging from .005" to .020", along with handheld probes; products are commonly utilized for new product development and reliability analysis
Type K Thermocouple Connectors - miniature, standard size, panel mounted, circuit board and other configurations available in thermoplastics, thermosets and ceramics
Type K Thermocouple Wire - diameter and insulations from fine diameter 40 gage (.003") to rugged 20 Gage (.032") with Plastic Fluoropolymers to higher temperature Fiberglass and or with Metal Overbraiding.
-
Type K Thermocouple Extension Cable - 2ft and Longer FEP Insulated Wire with Miniature Male and Female Connector
from $18.00
-
Type K Thermocouple Fine Diameter Extension Cable 8ft Long Leads with Miniature Female Connector and Stripped Ends
$18.00
-
Type K Thermocouple Extension Cable - FEP Lead Wire with Stripped Ends and Miniature Female Connector
from $16.50
-
Type K Thermocouple Extension Cable Assemblies - PFA or FEP Fluoropolymer Insulated Wire with a Miniature Male Connector and Stripped End Terminations
from $15.00
-
Type K Thermocouple Penetration Probe with Transition to Lead Wire - 8 Inch Long 3/16" Diameter Stainless Steel Sheath Ungrounded with FEP Lead Wire and Miniature Connector
from $60.00
-
High Temperature Ceramic Fiber Insulated Thermocouple with Type K 20 Gage Wire and Miniature Male Connector
from $50.00
-
Dual Type K Thermocouple Extension Cable with Dual Miniature Female Connector and 3ft or LONGER FEP Insulated Leads Wire with Stripped Ends Termination
from $40.00
-
Dual Type K Thermocouple Extension Cable with Dual Miniature Female Connector and 3ft or LONGER FEP Insulated Leads with Miniature Male Connectors Termination
from $50.00
-
Type K Thermocouple Extension Cable FEP Insulated Solid 24 Gage Wire with Standard Size Round Pin Female Connector and Stripped Ends Terminations
from $20.00
Special Offers and Product Education
