Type T Miniature Female Ceramic Thermocouple Connector

Type T Miniature Female Ceramic Thermocouple Connector - Compact Design

• Temperature Operating range of -328 to 662°F (-200 to 350°C)
• Excellent solution for Vacuum applications 
• Flat Female pins are made from the thermocouple alloys and are Polarized with a larger width negative flat pin and smaller width positive pin to ensure proper connection.
• Terminal Contact washers provides an easy to use although secure thermocouple wire connection point. A molded internal barrier prevents short circuits.
• Maximum wire diameter .023" (0.6 mm) typically 24 Gage solid wire.
• If larger diameter wires are being considered the wire conductors will need to be slightly flattened to allow the connector cap to fit flush with the connector body. 
• Stainless Steel screws with a Combination Head Design accepting both Slotted and Phillips head screwdrivers. 
• Connector Body dimensions can be viewed or printed by clicking on the following Type T Miniature Female Ceramic Thermocouple Connector Dimensions and are summarized as the following. 1.06" (27 mm) long by .728" (18.5 mm) wide by .378" (9.6 mm) thick with a .177" (4.5 mm) cable opening. 
• Miniature Ceramic connectors are typically 1/16" (.062 or 1.57 mm) Thicker and .098" (2.5 mm) Wider than miniature plastic connectors resulting in a need of different accessories such as wire clamps. The ceramic connector are also slightly longer
• EvoSensors part number: T1X-FEMX-CON-FP-X-MCCF
• Location: A-4-22

Consider the following Accessories to complete your Connector System