Type K Thermocouple
A Type K Thermocouple is one of most utilized temperature sensor technologies across the globe due to its wide temperature range -328 to 2300°F (-200 to 1260°C), the ease of use and cost value.
-
Temperature Range of -328 to 2300°F (-200 to 1260°C)
- Standard Accuracy is (Standard Limits of Error) ± 2.2°C or ± 0.75% whichever is greater in the temperature range of 32 to 2300°F (0 to 1260°C)
- High Accuracy is (Special Limits of Error) ± 1.1°C or ± 0.4% whichever is greater in the temperature range of 32 to 2300°F (0 to 1260°C)
- Low Temperature Accuracy from 32 to -328°F (0 to -200°C) is typically Standard Limits of Error (±) 2.2°C or (±) 0.75% whichever is greater
- Sensor Contructions range from exposed fast response small .010" (.25 mm) diameters to .375" (9.5 mm) or larger diameters with protective sheaths for immersion processes and others special designs for surface or flow temperature measurement.
- The Type K bare thermocouple elements can protected by compacted mineral insulation inside a bendable metal and rigid ceramic sheaths to very flexible fiberglass and ceramic braid or PFA/FEP teflon insulated wire designs.
- Type K thermocouples can be found in very diverse applications from harsh industrial and machinery environments to precise research and laboratory applications to general temperature measurement including everyday consumer use.
- The Filter Search tool on the Left or Click on the product categories below will aid in your product selection.
Type K Thermocouple Probes - with Stainless Steel, Inconel metal sheaths, and Ceramic Alumina Sheaths ranging in diameter from very fine .010" Inch (0.25mm) to rugged .250" (1/4" or 6.35mm). Probe terminations include, miniature and standard size connectors or wire leads
Type K Beaded Thermocouples - PFA, Fiberglass, and Ceramic insulated lead wire with high flexibility, diameters ranging fine 40 gage to rugged 20 gage, and temperature ranges from -326 to 2200°F; micro-beaded exposed weld provides very fast response times.
Type K Surface Thermocouples - stick on and bolt down versions available, with wire diameter ranging from .005" to .020", along with handheld probes; products are commonly utilized for new product development and reliability analysis
Type K Thermocouple Connectors - miniature, standard size, panel mounted, circuit board and other configurations available in thermoplastics, thermosets and ceramics
Type K Thermocouple Wire - diameter and insulations from fine diameter 40 gage (.003") to rugged 20 Gage (.032") with Plastic Fluoropolymers to higher temperature Fiberglass and or with Metal Overbraiding.
-
Type K Thermocouple Wire - Fine Diameter 30 Gage with Fiberglass Insulation Rated to 900°F (480°C)
from $25.00
-
Type K Flexible Wire Design Thermocouple for Vacuum Applications - Fast Response Exposed Design with 6ft of 30 Gage PFA Insulated Lead Wire and Miniature Ceramic Connector
$35.00
-
Type K Thermocouple Fine Diameter Extension Cable 8ft Long Leads with Miniature Female Connector and Stripped Ends
$18.00
-
Type K Small Diameter Glass Braid Insulated Wire Bead Thermocouple with High Temperature Ceramic on Bead and 30ft Long Wire Leads
$38.00
-
Type K Thermocouple .040" (1 mm) Diameter 12 Inch and Longer Length Inconel Sheath Grounded with a Transition to Lead Wire
from $55.00
-
Type K Surface Thermocouple Self Adhesive Patch Design with 5 to 50ft or Other Custom Lead Wire Lengths and Miniature Connector
from $25.00
-
Type K Thermocouple Probe 2 Inches Long 1/8" Diameter Ungrounded with 30ft of FEP Lead Wire and Connector
$70.00
-
Type K Thermocouple Extension Cable - FEP Lead Wire with Stripped Ends and Miniature Female Connector
from $16.50
-
Type K Thermocouple Probe – 6-Inch Long 1/8" Diameter Stainless Steel Sheath Ungrounded with 40 Inches and Longer Stainless Steel Braid over FEP Lead Wire and Stripped Ends
from $55.00
-
Type K Thermocouple Extension Cable Assemblies - PFA or FEP Fluoropolymer Insulated Wire with a Miniature Male Connector and Stripped End Terminations
from $15.00
-
Type K Surface Thermocouple with 2 Inch Wide Adhesive Patch and Rugged 24 Gage FEP Insulated Wire 80 Inches Long with Miniature Connector
$25.00
-
Type K Thermocouple Probe – 12-Inch Long 1/8" Diameter Stainless Steel Sheath Grounded with a Transition to Stainless Steel Braid over FEP Insulated Wire with Stripped Leads
$60.00
-
5 Pack of Type K Thermocouple with Surface Adhesive Patch and 120 inches of Fiberglass Wire with Miniature Connector
from $200.00
-
Type K Fine Diameter Flexible Wire Style Thermocouple with an Exposed Bead - 3ft Plus (1 meter) Long 30 Gage PFA Insulated Wire Leads with Stripped Ends
$13.00
-
Type K Thermocouple Probe 36 Inch Long 1/8" Diameter Stainless Steel Sheath with Ungrounded Junction and Standard Size Male Round Pin Connector
$60.00
-
Type K Surface Thermocouple 5 Pack with Self-Adhesive Patch 80 Inches (2 Meters) of 30 Gage PFA Insulated Wire with Stripped Leads
$115.00
-
Type K Handheld Thermocouple Probe 12 Inch Long 1/8" Diameter Stainless Sheath with Retractable Cable Lead Wire and Miniature Male Connector
$60.00
-
Type K Surface Thermocouple Probe 12 Inches Long Handheld Design with Flat Exposed Sensor and Retractable Coil Cord Leads with Miniature Connector
$70.00
Special Offers and Product Education
