Type K Thermocouple
A Type K Thermocouple is one of most utilized temperature sensor technologies across the globe due to its wide temperature range -328 to 2300°F (-200 to 1260°C), the ease of use and cost value.
-
Temperature Range of -328 to 2300°F (-200 to 1260°C)
- Standard Accuracy is (Standard Limits of Error) ± 2.2°C or ± 0.75% whichever is greater in the temperature range of 32 to 2300°F (0 to 1260°C)
- High Accuracy is (Special Limits of Error) ± 1.1°C or ± 0.4% whichever is greater in the temperature range of 32 to 2300°F (0 to 1260°C)
- Low Temperature Accuracy from 32 to -328°F (0 to -200°C) is typically Standard Limits of Error (±) 2.2°C or (±) 0.75% whichever is greater
- Sensor Contructions range from exposed fast response small .010" (.25 mm) diameters to .375" (9.5 mm) or larger diameters with protective sheaths for immersion processes and others special designs for surface or flow temperature measurement.
- The Type K bare thermocouple elements can protected by compacted mineral insulation inside a bendable metal and rigid ceramic sheaths to very flexible fiberglass and ceramic braid or PFA/FEP teflon insulated wire designs.
- Type K thermocouples can be found in very diverse applications from harsh industrial and machinery environments to precise research and laboratory applications to general temperature measurement including everyday consumer use.
- The Filter Search tool on the Left or Click on the product categories below will aid in your product selection.
Type K Thermocouple Probes - with Stainless Steel, Inconel metal sheaths, and Ceramic Alumina Sheaths ranging in diameter from very fine .010" Inch (0.25mm) to rugged .250" (1/4" or 6.35mm). Probe terminations include, miniature and standard size connectors or wire leads
Type K Beaded Thermocouples - PFA, Fiberglass, and Ceramic insulated lead wire with high flexibility, diameters ranging fine 40 gage to rugged 20 gage, and temperature ranges from -326 to 2200°F; micro-beaded exposed weld provides very fast response times.
Type K Surface Thermocouples - stick on and bolt down versions available, with wire diameter ranging from .005" to .020", along with handheld probes; products are commonly utilized for new product development and reliability analysis
Type K Thermocouple Connectors - miniature, standard size, panel mounted, circuit board and other configurations available in thermoplastics, thermosets and ceramics
Type K Thermocouple Wire - diameter and insulations from fine diameter 40 gage (.003") to rugged 20 Gage (.032") with Plastic Fluoropolymers to higher temperature Fiberglass and or with Metal Overbraiding.
-
Dual Thermocouple - Type K MI Cable Probe Stainless Steel Sheath 1/8" Diameter Ungrounded 12 Inches Long with Male Standard Size Connector
$70.00
-
Dual Type K Exposed Thermocouple 6 Inch Long 1/8" Diameter Stainless Steel Sheath and Miniature Dual Male Flat Pin Connector
$90.00
-
Thermocouple Dual Type K MI Cable Probe Inconel Sheath 1/8" Diameter Ungrounded 12 Inches Long with Dual Standard Connector
$80.00
-
Type K Dual Thermocouple Probe 6 Inch and Longer 1/4" Diameter Inconel Sheath Ungrounded with Dual Standard Size Connector
$75.00
-
Type K Hermetically Sealed Thermocouple - Flexible Wire Design with 3 to 100ft of 24 Gage Stranded FEP Insulated Wire and Miniature Male Connector
from $35.00
-
Type K Fine Wire Thermocouple 36 Gage Wire with Epoxy Coated Tip and 40 Inches (1 meter) of Leads with Miniature Connector
$25.00
-
Thermocouple Adapter Type K Connector- Accepts Standard Size Round Pin Male and Converts to Miniature Flat Pin Male
$14.00
-
Type K Thermocouple Connector Adapter - Accepts Miniature Flat Pin Male and Converts to Standard Round Pin Male
$14.00
-
Type K Thermocouple Connector Adapter - Accepts Miniature Flat Pin Female and Converts to Standard Round Pin Male
$14.00
-
Type K Thermocouple Connector Adapter - Accepts Miniature Flat Pin Male and Standard Round Pin Male
$14.00
-
High Temperature Glass Braided Thermocouple - Type K with 40 inches of 24 Gage S2-Glass Insulated Wire and Miniature Connector
$20.00
-
High Temperature Glass Braided Thermocouple - Type K with 80 inches of 24 Gage S2-Glass Insulated Wire and Miniature Connector
$21.00
-
High Temperature Glass Braided Thermocouple - Type K with 120 inches of 24 Gage S2-Glass Insulated Wire and Miniature Connector
$25.00
-
High Temperature Glass Braided Thermocouple - Type K with 40 inches of 30 Gage S2-Glass Insulated Wire and Miniature Connector
$25.00
-
High Temperature Glass Braided Thermocouple - Type K with 80 inches of 30 Gage S2-Glass Insulated Wire and Miniature Connector
$27.00
-
High Temperature Glass Braided Thermocouple - Type K with 120 inches (10ft) and LONGER of 30 Gage S2-Glass Insulated Wire and Miniature Connector
from $40.00
-
High Temperature Glass Braided Thermocouple - Type K with 300 mm of 30 Gage S2-Glass Insulated Wire and Miniature Connector
Out of stock
-
High Temperature Glass Braided Thermocouple - Type K with 550 mm of 30 Gage S2-Glass Insulated Wire and Miniature Connector
Out of stock
Special Offers and Product Education
