Type B Platinum Rhodium Thermocouple - Ceramic Sheath 6 to 24 Inch Long x 1/8" Diameter with 30 Gage (.010") Internal Wire with a Metal Transition Fitting to 3ft and Longer Fiberglass Insulated Lead Wire with Stainless Steel Overbraid
Evolution Sensors and Controls
$525.00
SKU: B1X-CINS-125-30G-UX-6-FGSB-40-STWL
Type B Platinum Rhodium Thermocouple - Ceramic Sheath 6 to 24 Inch x 1/8" Diameter with 30 Gage (.010") Internal Wire with a Metal Transition Fitting to 3ft and Longer of 900°C Rated Fiberglass Braid Insulated Lead Wire with Stainless Steel Over braid
-
Continuous Temperature range 392 to 3092°F (200 to 1700°C)
- Short Term Temperatures up to 3360°F (1850°C)
- For best accuracy, recommended use is at temperatures above 1,000°F (537°C).
- Ungrounded thermocouple junction provides protection to the wire and can minimize electrical interferece to the measurement signal.
-
Closed End Alumina (Ceramic) Sheath protects the thermocouple junction from the atmosphere and the ungrounded juction minimizes electrical noise interference
- 6-Inch to 24-Inch 1/8" diameter rigid sheath rated to 3632°F (2000°C)
-
Never Heat or Cool alumina ceramic tubes faster than 5°C per minute above 1000°C. In fact, a slower cool down rate is recommended
- Inner Wire is 30 gage .010 inch (0.25 mm) diameter internal bare wire inside sheath
-
Probe Transition to a Stainless Steel metal fitting backfilled with high temperature Cement and Stainless Steel spring strain relief with 40 Inches (1 Meter) and Longer of 24 Gage Stranded Fiberglass Insulated lead wire rated up to 900°F (482°C).
- The bare wires can accurately transfer the full range of Type B thermocouples
- Instrument Connection: Stripped Wire Ends
-
EvoSensors part number: B1X-CINS-125-30G-UX-(X)-FGSB-(XX)-STWL
-
-
-
- (X) = Probe Length in Inches / (XX) = Lead Wire Length in Inches
-
-
- B1X-CINS-125-30G-UX-6-FGSB-40-STWL
- B1X-CINS-125-30G-UX-12-FGSB-40-STWL
-
Consider the following products to complete your temperature measurement system
Need Help? 407-420-8080
email: info@evosensors.com
email: info@evosensors.com



